
Milling Vices
Milling Machine – Fixed Base
Price on request: add it to your enquiry
- Direct from the manufacturer
- ISO 9001:2015 quality system
- Made to your size, grade and finish
Specifications and details
Features :
- Tilt Lock Machine Vice design is beamlike with two vertical and horizontal rails connected to the base.
- You can hold piece parts in the most immobile state possible
Three Basics in precision Clamping
- 1.That the movable jaw does not lift off the bed.
- 2.That the body is rigid, and that a minimal amount of bending stresses are created in the clamping area.
- 3.That deflection of the stationary jaw is minimized.
- Totally enclosed toughened Screw.
- The bed is guaranteed flat and parallel .0001 per inch.
Construction :
- Graded Cast Iron dully stress relieved body. Tool steel hardened & ground Jaws.
- In addition to the rigid design characteristics, a large heavy nut is drawn up against the machined ways on the inside vice as the movable jaw is drawn down. This creates a heavy mass of material under compression and extremely resistant to bending stresses.
4 Jaws Plate positions allowing extra capacity with the jaw plates in the outside position.
| Code | KCMV01 | KCMC02 | KCMV03 | KCMV04 | KCMV05 | KCMV06 |
|---|---|---|---|---|---|---|
| Size | 2” | 3” | 4” | 5” | 6” | 8” |
Related
