112 B, Swarn Park, Udhyog Nagar, Mundka, Delhi - 110041
+91 - 9873244372
In Collaboration With
In Collaboration With In Collaboration With In Collaboration With

Milling Machine – Fixed Base

Milling Machine – Fixed Base

Our Products

Milling Machine – Fixed Base Image 1
Milling Machine – Fixed Base Image 2
Milling Machine – Fixed Base Image 1 Milling Machine – Fixed Base Image 2

Milling Machine – Fixed Base

Send Enquiry
Features :
  • Tilt Lock Machine Vice design is beamlike with two vertical and horizontal rails connected to the base.
  • You can hold piece parts in the most immobile state possible
Three Basics in precision Clamping
      1.That the movable jaw does not lift off the bed.
      2.That the body is rigid, and that a minimal amount of bending stresses are created in the clamping area.
      3.That deflection of the stationary jaw is minimized.
  • Totally enclosed toughened Screw.
  • The bed is guaranteed flat and parallel .0001 per inch.
Construction :
  • Graded Cast Iron dully stress relieved body. Tool steel hardened & ground Jaws.
  • In addition to the rigid design characteristics, a large heavy nut is drawn up against the machined ways on the inside vice as the movable jaw is drawn down. This creates a heavy mass of material under compression and extremely resistant to bending stresses. 4 Jaws Plate positions allowing extra capacity with the jaw plates in the outside position.
Code KCMV01 KCMC02 KCMV03 KCMV04 KCMV05 KCMV06
Size 2” 3” 4” 5” 6” 8”

 

Featured Products

Drill Machine Vise

Drill Machine Vise

Read More +
Angle Vise (With 2-way swivel Movement)

Angle Vise (With 2-way swivel Movement)

FEATURES: Positive locking to withstand heavy loads. Horizontal swivel movement 360 degrees. Vertical swivel movement 90 degrees. Totally enclosed acme thread screw. Accurately hardened and grinned jaws run on precision…

Read More +
Tool Makers Screw Less Vise (Steel Body)

Tool Makers Screw Less Vise (Steel Body)

Read More +
Sine Vise

Sine Vise

Read More +
Tool Makers Vise (With Lead Screw)

Tool Makers Vise (With Lead Screw)

Read More +
Precision Toolmakers Insert Vise

Precision Toolmakers Insert Vise

Read More +
Milling Machine Vises With/Fixed Bases/Swivel Bases

Milling Machine Vises With/Fixed Bases/Swivel Bases

Read More +
Bench Vises With Swivel Base

Bench Vises With Swivel Base

Read More +
Unigrip Machine Vise

Unigrip Machine Vise

Read More +
All – Steel Machinists Bench Vises

All – Steel Machinists Bench Vises

Read More +
Nail Punches

Nail Punches

Read More +
Hexagon Special Rethreding Dies

Hexagon Special Rethreding Dies

HEXAGON SPECIAL RETHREADING DIES Right Hand - Left Hand - Special Sizes CODE - KTHRD 101

Read More +

Keys & Clamps

  • 112 B, Swarn Park, Udhyog Nagar, Mundka, Delhi - 110041
  • +91 - 9873244372
  • sales@keytechno.com
Copyright © 2018 Keys & Clamps. All Rights Reserved.

SiteLock